How To Install

Install in 90 seconds — no tools, no plumber.

CROWNE replaces your existing shower head and connects to a standard ½" shower arm. Here's the whole process:

1. Remove your old shower head. Turn it counter-clockwise by hand to unscrew it from the shower arm. If it's stiff, use a cloth for grip or a wrench gently.
2. Clean the threads. Wipe the shower-arm threads so the new seal sits cleanly.
3. Wrap the threads with the included Teflon tape. A few clockwise wraps prevents drips.
4. Attach CROWNE. Screw the hose or head on clockwise, hand-tight. Don't over-tighten.
5. Insert the filter cartridge (if not pre-installed) and click the spray head into place.
6. Run the water for 15–20 seconds. This flushes the new filter — a little discoloration at first is normal. Check for leaks; add a wrap of tape if needed.

That's it. If you hit any snag, email our US-based support and we'll walk you through it.